Link to download Eagle files including: library file, project files, and Gerber files:
https://dl.dropboxusercontent.com/u/26591541/AVR_IoT_Board_Eagle_Files_8_8_15.zip
*******************Arduino Test Sketch************************************
//This sketch is to test a DIY Arduino compatiable board with Bluetooth 4.0 on it
//the board is targeted IoT applications. Details can be found of the ForceTronics
//YouTube channel. This code is open for anybody to use and modify
int wValue = 1; //variable to hold write value (high or low)
void setup() {
Serial.begin(115200); //start serial
}
void loop() {
delay(1000);
setPinMode(OUTPUT, INPUT); //set D2 to D7 as outputs, and D8 to D13 to inputs
setDigWrite(false, wValue); //set group of pins to write and write high or low
Serial.print("D2 thru D7 writing ");
Serial.println(wValue);
Serial.println("D8 thru D13 reading the following values....");
printDigPins(true); //print what dig pins read
delay(1000);
setPinMode(INPUT, OUTPUT); //set D2 to D7 as intputs, and D8 to D13 to outputs
setDigWrite(true, wValue); //set group of pins to write and write high or low
Serial.print("D8 thru D13 writing ");
Serial.println(wValue);
Serial.println("D2 thru D7 reading the following values....");
printDigPins(false); //print what dig pins read
delay(1000);
adcReads(); //read each ADC pin and print result
if(wValue) wValue = 0; //toggle digital write value
else wValue = 1;
delay(1000);
}
//function sets D2 thru D7 to input / output and D8 thru D13 to input / output
void setPinMode(int smallMode, int bigMode) {
for(int i=0;i<6;i++) {
pinMode((i+2), smallMode);
pinMode((i+8), bigMode);
}
}
//Writes high or low to group of digital pins
void setDigWrite(bool big, int state) {
if(big) {
for(int i=0;i<6;i++) {
digitalWrite((i+8), state);
}
}
else {
for(int i=0;i<6;i++) {
digitalWrite((i+2), state);
}
}
}
//does digital read on group of digital pins and prints results
void printDigPins(bool big) {
if(big) {
for(int i=0;i<6;i++) {
Serial.print("Value at pin D");
Serial.print((i+8));
Serial.print(" --> ");
Serial.println(digitalRead((i+8)));
}
}
else {
for(int i=0;i<6;i++) {
Serial.print("Value at pin D");
Serial.print((i+2));
Serial.print(" --> ");
Serial.println(digitalRead((i+2)));
}
}
}
//Reads each ADC pin and prints result
void adcReads() {
for(int i=0; i<6; i++) {
Serial.print("ADC value at Pin A");
Serial.print(i);
Serial.print(" --> ");
Serial.println(analogRead(i));
}
}
